Knowledge Base

Adding and Editing Text Translations

OneRain 2020-05-28 21:41:28
Views 26


To add a new Text Translation, in the Administration environment, navigate to the Sensor where text translation will be implemented. From the Edit dropdown menu, select Translation. Enable Translation by setting the toggle switch to On. Select the Import button to load the upload file screen, where you will select the comma delimited option if the file is a CSV, or the Tab delimited option if the files is a tab delimited .txt file. Select Browse and navigate to the file that was created earlier and select Open, then select Upload to proceed. On the Match Column page, the input value is matched to the translated output value. Select the drop downs to match Input to Input and Output to Output, and select Save.

To edit an existing Text Translation, in the Administration environment, navigate to the Sensor where text translation will be implemented. From the Edit dropdown menu, select Translation. Download the existing Translation by clicking the Download button. Edit the file on your computer by opening the file in a program like Notepad or Notepad++. After saving the edits, back in Contrail, open the Download dropdown menu and click Delete to remove the current Translation. To add your new translation, follow the instructions above.

Example files for Text Translations can be found linked below.

Was this article helpful?

Contrail® Help © 2004 - 2020